JetsetRobot are pleased to announce the re-release of our GT12 Toe-In Gauges. CNC machined from acrylic and delrin, these GT12 toe-in gauges allow you to set up the front end of your GT12 car precisely each time.
The gauges can be purchased here, while the board is simply downloaded and printed on a piece of A4 paper. When printing the board, be careful to print at 100%.
The Board can be downloaded here
Another happy customer! This 3D Hubs print order is for a Nerf gun part printed in Colorfabb PLA/PHA Blue-Grey 0.2mm layer height @30mm/sec speed. 15% infill.
We are pleased to announce the release of our new JSR 1:10 Off Road Shock Protectors. These are 3D Printed in Semiflex from Fenner Drives, the makers of Ninjaflex, on a P3 Steel at 0.2mm layer height with a speed of 15mm/s. Initial versions of the covers were printed in PLA first, then PLA/PHA mix for added strength but they required more flexibility during an impact which is why we chose Semiflex.
This specialized filament required alot of dialing in to achieve good results but once we had reduced the print speed and played around with the temperature, the finish was great. I am using an E3D V6 lite, which allows me to extend the PTFE sleeve to just below the hobbed direct drive. This is needed for printing such a flexible filament.
We have carried out extensive testing with the shock protectors and are now happy to offer them for sale. They are just £9.95 per pair plus postage and are available to purchase from ebay.